You are currently in the:
Emblaser 2
|
 |
From: $3,875.00
Purchase an Emblaser 2 10w laser Complete Set and receive with Creative Kit
Promotional Items valued at $1,170.67 incl GST
Emblaser 2 10w laser Complete Set includes:
1 x Emblaser 2 10w laser cutter
1 x Indoor Fume Filtration System
1 x Spare replacement filter
Creative Kit includes:
1 x Wacom Tablet
3 x Poplar Plywood 5 pack
1 x White/black contact film
1 x Mug
2 x USB thumb drive
1 x 2nd year warranty
Terms & Conditions
1. Promotion begins 1st of October 2023 to 31st December 2023
2. Promotion cannot be combined with any other promotion.
3. Promotion is while stocks last. Once the stock of each product is exhausted, the promotion ends.
4. Free filament may be on back order if stocks run out.
5. Promotion is only open to Australian Mainland residents
6. Free freight only valid for sales within the mainland of Australia.
7. Orders that are not paid in full by the promotion expiry date will not be eligible to be claimed.
8. Claims cannot be made on back or past orders
Large Workspace
Build Volume
You can engrave & cut up to 500x300mm with a maximum material height of 50mm
Connectivity
WiFi & USB
Use the Emblaser 2 either wirelessly or via USB. You choose.
Workspace Camera
Scan & Trace
Using the workspace camera you can engrave your drawn design onto the material directly.
Fumes
Extraction or Filtration
Either use the inbuilt fume extraction to vent outdoors or get the optional fume filtration unit
Features
One of the incredible features of the Emblaser 2 is true 3D cutting & engraving. You can automatically adjust the height of the laser while cutting and engraving to gain an extra dimension of control. Cut through thicker materials by setting your laser to automatically lower with multiples passes.
Create 3D engravings with depth or automatically adjust the sharpness of your laser to create sharp lines or soft fills.
‘Material Ignition Alert’, or ‘MIA’ constantly monitors for the potential ignition of a material, a situation that may arise in any laser cutter. If detected, MIA places the machine is a safety mode and sounds a warning alarm.
Air-Assist increases cutting performance and creates cleaner cuts by injecting a stream of high pressure air into the cutting region. Traditionally only available in industrial machines, the Emblaser 2 comes ready to accept our air-assist accessory.
Here is difference air-assist can make on various materials. The left cut is without air-assist running.
| THICKNESS | ENGRAVED | CUT | NOTES | |
|---|---|---|---|---|
| Fabric – Cotton | 3mm | Y | Y | |
| Fabric – Felt | 6mm | N | Y | All colours except white. |
| Leather – Vegetable Tanned | 4mm | Y | Y | Treatment & color dependant. Air-Assist recommended. |
| Paper/Card – Corrugated Cardboard | 6mm | Y | Y | |
| Paper/Card – Pasteboard | 2.6mm | Y | Y | |
| Paper/Card – Plain Paper | 3mm | Y | Y | Any colour. |
| Plastic – Acrylic Black | 5mm | Y | Y | |
| Plastic – Acrylic Green, Red Yellow | 3mm | Y | Y | |
| Plastic – Acrylic Translucent (tinted) | – | Y | N | |
| Plastic – Acrylic Blue | – | Y | N | |
| Plastic – Acrylic Transparent & White | – | Y* | N | *Possible with coating. |
| Plastic – Polypropylene | 3mm | Y | Y | Air-Assist recommended. |
| Wood – Poplar Plywood | 6mm | Y | Y | |
| Wood – Balsa | 10mm | Y | Y | |
| Wood – MDF | 3mm | Y | Y | |
| Anodised Aluminium | – | Y | N | |
| Slate | – | Y | N | |
| Corkboard | 3mm | Y | Y | Air-Assist required. |
| Rubber | 2mm | Y | Y | Air-Assist recommended. |
Specification
Software
| Emblaser 2 | |
|---|---|
| Dimensions | |
| External Dimensions | 540mm x 720mm x 200mm |
| Material Capacity | 500mm x 300mm x 50mm |
| Optics | 0.4mm |
| Focus | Factory pre-focused |
| Laser Unit Type | Solid-State Diode Equivalent to 15-20watt CO2 laser |
| Classification | Class I The safest laser device rating available. |
| Hardware | |
| 3D Cutting & Engraving, fully software controlled. | |
| Camera for material alignment. | |
| Wifi & USB Connectivity | |
| Fume Extraction, built-in. | |
| Internal Workspace Lighting | |
| Accesories | |
| Fume Filtration System | |
| Air-Assist System | |
| Lightburn | License free for life and includes 3 years of free updates. |
What's in the Box
• 1 x Fully assembled Emblaser 2 including air-assist & camera
1 x seats LightBurn software (if you are a school you can apply for 50 free Lightburn seats)
• 4 x Cutting Mats
• 1 x Exhaust tube for venting out to a window
• 1 x Power Adapter
• 1 x Power Cord
• 1 x Tool & Cleaning Kit
• 1 x USB Cable
Additional Accessory
